IBC Tank Accessories
Everything you need to optimize, protect, and maintain your IBC totes. From replacement valves and adapters to heating blankets, containment pallets, and industrial mixers.
Get a Free Quote
Tell us what you need and we'll get back to you within 24 hours.
Valves & Fittings
Replacement valves and discharge fittings for IBC totes. All valves fit standard 2-inch (DN50) IBC outlets. We stock both OEM-equivalent replacements and upgraded options for better flow control.
2" Butterfly Valve
$15 - $30
Standard polypropylene butterfly valve with EPDM seal. Direct replacement for most IBC totes. Quarter-turn open/close operation. FDA-approved materials available.
2" Ball Valve
$25 - $55
Heavy-duty ball valve for applications requiring a tighter seal and more precise flow control than a butterfly valve. Stainless steel or polypropylene construction.
2" Camlock Adapter
$10 - $35
Type A, B, C, D, E, and F Camlock fittings in polypropylene or stainless steel. Enables quick-connect/disconnect for hose and pump connections.
Garden Hose Adapter
$8 - $15
Converts the 2-inch IBC outlet to a standard 3/4-inch garden hose thread. Includes shut-off valve. Perfect for rain barrel and irrigation setups.
Y-Splitter Adapter
$18 - $30
Splits a single 2-inch IBC outlet into two independent 3/4-inch or 1-inch outlets with individual shut-off valves. Ideal for running two hose lines from one tote.
Sight Glass / Flow Meter
$35 - $80
Inline sight glass or paddle-wheel flow meter for the 2-inch outlet. Monitor flow rate and liquid level without opening the tank.
Caps & Lids
Replacement caps, lids, and gaskets for the top fill opening. Ensure a proper seal to prevent contamination, evaporation, and pest entry.
6" Screw Cap
$8 - $15
Standard 150mm (6-inch) screw cap with integrated EPDM gasket. Fits virtually all IBC totes. Available in natural (white), black, and blue.
6" Vented Cap
$15 - $25
Screw cap with a built-in pressure/vacuum relief vent. Prevents tank collapse during drainage and pressure buildup during temperature changes. Essential for outdoor installations.
6" Cap Gasket (Replacement)
$3 - $5 each
EPDM or silicone gasket for the 150mm fill cap. Replace worn or cracked gaskets to restore a leak-free seal. Sold individually or in 10-packs.
8" Wide-Mouth Lid
$12 - $20
Oversized 200mm fill opening lid for tanks equipped with wide-mouth tops. Easier access for cleaning, mixing, and adding viscous materials.
Mesh Screen Lid
$12 - $22
Screened fill cap that keeps debris, insects, and animals out while allowing airflow. Stainless steel mesh rated at 40 or 80 mesh. Popular for rainwater collection.
Covers & Protection
Protect your IBC totes from UV radiation, algae growth, temperature extremes, and the elements. Essential accessories for any outdoor installation.
UV Protection Cover (Full)
$30 - $55
Heavy-duty UV-resistant cover that wraps the entire IBC tote. Blocks sunlight to prevent algae growth and HDPE degradation. Extends outdoor tank life by 3-5 years. Available for 275-gallon and 330-gallon sizes.
Insulated Thermal Blanket
$80 - $150
Multi-layer insulated blanket that wraps around the IBC tote to maintain liquid temperature. Keeps contents from freezing in winter and overheating in summer. R-value of approximately 4.5.
Electric Heating Blanket
$250 - $450
120V or 240V thermostatically controlled heating blanket. Maintains liquid temperature from 40F to 160F. Built-in adjustable thermostat and ground-fault protection. UL-listed.
Top Dust Cover
$15 - $25
Fitted cover for the top of the IBC cage. Keeps rain, dust, and debris off the fill cap area. Elastic edge for secure fit. Water-resistant nylon.
Stands & Elevation
Raise your IBC tote off the ground for gravity-fed dispensing, better drainage, and improved access to the bottom valve.
Galvanized Steel IBC Stand
$120 - $200
Heavy-duty galvanized steel stand that elevates the IBC tote 18-30 inches off the ground. Rated for 4,000 lbs. Provides comfortable access to the butterfly valve and enables gravity-fed dispensing into buckets, hoses, or smaller containers.
Tilting Stand / Cradle
$150 - $280
Adjustable stand that tilts the IBC tote 5-15 degrees toward the outlet valve. Ensures complete drainage of the last 5-10 gallons that normally pool in the bottom of a level tote. Essential for expensive liquids.
Stacking Frame
$80 - $140
Steel stacking frame that sits on top of one IBC and supports a second tote above it. Doubles your vertical storage capacity. Load-rated for a full 330-gallon tote on top.
Containment & Safety
Spill containment pallets and safety equipment for regulatory compliance and environmental protection. Required by EPA and many state regulations for chemical storage.
Single IBC Containment Pallet
$300 - $500
Polyethylene spill containment pallet sized for one IBC tote. 275-gallon or 330-gallon sump capacity meets EPA 40 CFR 264.175 requirements for 110% containment. Integrated forklift pockets. Grated or solid deck options.
Double IBC Containment Pallet
$500 - $800
Side-by-side containment pallet for two IBC totes. 550-gallon sump capacity. Meets SPCC and EPA containment requirements. Removable grates for easy sump cleaning.
Quad IBC Containment Pallet
$900 - $1,400
Four-position containment pallet for high-volume storage areas. 1,100-gallon sump. Forklift-accessible from all four sides. Includes drain plug for authorized liquid removal.
IBC Drip Tray
$25 - $45
Low-profile drip tray that sits under the IBC outlet valve area. Catches minor drips during dispensing. 5-gallon capacity. Stackable for storage.
Mixers & Agitators
Keep liquids mixed, prevent settling, and maintain homogeneous blends directly inside your IBC tote without transferring to a separate mixing vessel.
IBC Tote Mixer (Electric)
$400 - $800
Clamp-mounted electric mixer that installs through the 6-inch fill opening. Variable speed from 50-350 RPM. 1/3 HP motor with stainless steel or polypropylene shaft and impeller. Suitable for blending, dissolving, and suspension maintenance.
Air-Powered IBC Mixer
$500 - $1,000
Pneumatic mixer for hazardous environments where electric motors are not permitted. Compressed air driven, ATEX-rated. Same mounting and impeller options as the electric model.
Bottom-Entry Magnetic Mixer
$600 - $1,200
Seal-less magnetic drive mixer that installs through the 2-inch bottom valve port. No shaft seal means zero leak risk. Ideal for sterile and high-purity applications.
Compatibility & Fitment
The vast majority of IBC totes manufactured after 2000 use standardized dimensions: a 6-inch (150mm) top fill opening with buttress thread and a 2-inch (DN50) bottom outlet with NPS or BSP thread. Our accessories are designed to fit these standard dimensions. However, some older or specialty IBC totes may use non-standard threading or port sizes.
If you are unsure about compatibility, measure your fill opening diameter and outlet thread type before ordering, or contact our team with the IBC manufacturer name and model number. We can confirm fitment before you purchase.
Bulk & Wholesale Pricing
Managing a fleet of IBC totes? We offer significant volume discounts on all accessories. Whether you need 50 replacement valves, 100 UV covers, or containment pallets for an entire chemical storage yard, our wholesale pricing makes it economical to keep your operation fully equipped.
10-24 units
10% off list
25-49 units
15% off list
50+ units
20%+ off list